FIRST SENSOR-BASED MICRO MOTORS

Novak's Mod 0.5 and0.6 Aluminum PinionGear Sets include three gears that fit seamlessly with Novak's Three-80 Micro Pro Brushless Motor, which has a 1/8" output shaft. Compatibility Mod 0.6: For DuraTrax Vendetta line Mod 0.5: For Associated, Kyosho and Team Losi's micro vehicles, as well as Tamiya's TamTech line. #5200 Mod 0.6 Set: 11T/12T/13T #5210 Mod 0.5 Set: 11T/12T/13T Works well on small, tight tracks #5201 Mod 0.6 Set: 14T/15T/16T #5211 Mod 0.5 Set: 14T/15T/16T Excels on medium-sized tracks #5202 Mod 0.6 Set: 17T/18T/19T #5212 Mod 0.5 Set: 17T/18T/19T Performs great on large tracks

Novak has bred a micro brushless motor that is the first and only sensor-based brushless motor specifically designed for 1/18 and 1/16-scale cars. Because it is sensored and lightweight, it gives these micro scale cars the ability to maneuver at high speeds in extremely tight spaces, all with unsurpassed low speed and braking control. The Three-80 Brushless Motors are compatible with sensor-based ESCs including Novak's Club (#1852) and EDGE 2S (#1850/#1851) ESCs, which are both small, lightweight and ideal for 1/18 and 1/16-scaled vehicles.

The Three-80 Micro Pro Brushless Motors are available in three motor winds:

• Three-80 Micro Pro Brushless Motor 10.5T is 10.5 turns and 7,300 Kv and recommended for racers looking for a motor that offers a great balance between power and runtime. (#3451)
• Three-80 Micro Pro Brushless Motor 13.5T is 13.5 turns and 6,000 Kv and recommended for users looking for power with the longest possible runtimes. (#3452)
• Three-80 Micro Pro Brushless Motor 18.5T is 18.5 turns and 4,400 Kv and recommended for users looking for a motor with extremely long runtimes. (#S3454)(#3450)

WHY SENSORED?
Like the popular Novak Velociti brushless motors, the Three-80 Micro Pro motors feature a sensor commutation design. Knowledge of rotor position is key to smooth performance and is just as important in micro vehicles as in larger-scale vehicles. When the speed control always knows the rotor position, there is no hesitation before acceleration under load. The motor will provide smooth braking and controlled bursts of power. Other motor features include a high-strength, sintered rotor for maximum motor acceleration, an oversized front bearing for increased load handling and bearing life, and a rugged 1/8” shaft diameter. Like all Novak brushless motors, the Three-80 Micro Pro motors are rebuildable.

Of its many features, its sensor-based design allows for most of the motor's important benefits, including the following:

• No Cogging--Thanks to constantly knowing the rotor position, the motor provides instantaneous throttle response and smooth transitions from neutral to drive. The rotor position knowledge is attained due to the ESC and motor being continuously synchronized via the motor harness.
  
  
• Smooth & Controlled Low Speed Driveability--Always knowing the rotor angle is key to smooth acceleration without delivering abrupt and uncontrolled bursts of power.
  
  
• Strong/Consistent Brakes & Starting Torque--Rotor position knowledge results in consistent starts and stops, without hesitation or inconsistent lag times before acceleration or braking--this translates to consistant lap times.
  
  
• Thermal Protection--Position and temperature sensors inside motor provide unparalleled thermal protection, letting you run pack after pack without worrying about overheating the motor, ESC or magnets.

All Novak brushless motors are designed and built by Novak in Irvine, Calif. Each motor is factory hand-wound and is put through rigorous testing, including a final dyno test to ensure that each motor meets Novak’s rigid specifications.

THREE-80 MICRO PRO BRUSHLESS MOTOR FEATURES 380-size brushless motor specifically designed by Novak for 1/16th to 1/18th scale micro vehicles Oversized, rugged  front bearing for increased load handling and bearing life Multiple motor mount screw patterns Lightweight ribbed aluminum end bells Rebuildable design: user-replaceable rotor (#5915) and replacement front endbell & bearing kit (#5916) Compatible with Novak Mod 0.6 Pinion Gears (#5200, #5201 & #5202) and Mod 0.5 Pinion Gears (#5210, #5211 & #5212) Meets RoHS compliance and includes 120-Day Warranty Designed, hand-wound and dyno-tested by Novak in Irvine, Calif.

THREE-80 MICRO PRO BRUSHLESS MOTOR SPECIFICATIONS Turns: 10.5 (#3451), 13.5 (#3452), 18.5 (#S3454) Watts: 165 (#3451), 125 (#3452), 82 (#S3454) Kv (unloaded): 7,300 (#3451), 6,000 (#3452), 4,400 (#S3454) Motor Size: 380 size: 1.02" D x 1.48" L (26 D x 37.7 L mm) Motor Weight with wires: 2.54 oz. (72 grams) Shaft Diameter: 1/8" [accepts all existing pinion gears] Bearing Size: Oversized (1/2" x 3/16") Front; Standard Rear (7mm x 3mm)