EX Sport Brushless Motors

EX Sport
Brushless Motors

Buy me Now!

Back to Homepage

All EX motors can be upgraded for racing! Click here for more information on Novak's EX & SS4300/5800 Sintered Upgrade Kit. The kit includes a sintered rotor and endbell with an oversized bearing.

Novak's Sport Motors are Extreme

A tremendous addition to Novak’s brushless motor family is the EX Sport Brushless Motor Series. The budget-friendly sensored brushless motor series is ideal for R/C enthusiasts who have always wanted to join the brushless revolution but have resisted.

With Novak’s EX-Series brushless motors, the time has come to painlessly make the step up to brushless and personally experience all of the positive things said about brushless, but just found hard to believe; things like: incredible power and starting torque, minimal maintenance and longer runtimes.

Novak’s EX-Series Sport brushless motors are available in three motor winds and function great as XBR/EX Sport Brushless System motor replacements:

EX8.5 Extreme Sport Brushless Motor is 8.5 turns and the fastest of the XBR/EX Systems. (#3430)

EX10.5 Extreme Sport Brushless Motor is 10.5 turns and offers a great balance of speed and run time. (#3431)

EX13.5 Extreme Sport Brushless Motor is 13.5 turns and ideal for beginners and those wanting maximum run time.(#3432)

SPORT BRUSHLESS MOTOR FEATURES
Novak’s EX Sport motors also sport a new look for a Novak motor and it’s golden. Literally. The EX motors break from Novak’s traditional purple motor sleeve with a new gold one. And while the EX Brushless Motors may be described as “sport” models, they still include all of the great features of a Novak brushless motor like a convenient Solder Tab System for easy wire replacement; Sensor-Based Technology for excellent starting torque, low-speed drivability, and smooth acceleration; Thermal Overload Protection (when used with a Novak brushless ESC) that allows pack after pack to be run without fear of damaging the motor, battery, or ESC; and approximately 20% longer runtimes compared to brushed motors.

A unique feature of all Novak motors is the ability to upgrade or replace various parts. Although deemed a sport model, the EX motors are no exception. Users are able to replace parts like the front end bell/bearing and rear bearing (#5905), as well as the rotor (#5906) if needed, and not simply toss the motor aside. To upgrade the EX motor to SS-Series performance, Novak upgrade kit #5923 is available. This kit includes a sintered rotor and oversized bearings, which are required for optimal racing. The EX's bonded rotor is not recommended for racing.

Of its many features, its sensor-based design allows for most of the motor's important benefits, including the following:

No Cogging--Thanks to constantly knowing the rotor position, the motor provides instantaneous throttle response & smooth transitions from neutral to drive. The rotor position knowledge is attained due to the ESC & motor being continuously synchronized via the motor harness.

Smooth & Controlled Low Speed Driveability--Always knowing the rotor angle is key to smooth acceleration without delivering abrupt and uncontrolled bursts of power.

Strong/Consistent Brakes & Starting Torque--Rotor position knowledge results in consistent starts & stops, without hesitation or inconsistent lag times before acceleration or braking--this translates to consistant lap times.

Thermal Protection--Position & temperature sensors inside motor provide unparalleled thermal protection, letting you to run pack after pack without worrying about overheating the motor, ESC, or magnets.

Each motor is factory hand-wound and is put through rigorous testing, including a final dyno test to ensure that each motor meets Novak’s rigid specifications.

XBR Brush/Brushless ESC

Each EX Sport Brushless Motor is available separately, or in a combo system factory-wired with Novak’s new

XBR Sport Brushless ESC.

Like all Novak brushless systems, the brushless speed control and brushless motor are factory wired and tested together, and are ready to “plug and play” straight out of the box.

The following three XBR Sport / EX Brushless Systems are available:

ESC COMPATIBILITY
The Extreme Sport Brushless motors are compatible with all Novak brushless ESCs, including:

EX EXTREME SPORT BRUSHLESS MOTOR FEATURES
	Sensor-based for excellent braking and low-speed driveability
	Bonded Neodymium rotor
	Oversized front bearing for increased load handling and bearing life
	Ball bearings for smooth, low-friction operation
	Provides approximately 20% longer run-times compared to brushed motors
	Specifically designed for R/C vehicles
	User-replaceable rotor (#5906), and user-replaceable front end bell/bearing and rear bearing (#5905), and can be upgraded for race-ready performance, which includes Novak’s Sintered Rotor (#5923)
	Direct-Solder Wiring Tabs for flexible soldering options
	Minimal maintenance
	Thermal Overload Protection (when used with a Novak brushless ESC)
	No cogging
	Factory hand-wound and race-tuned by Novak in Irvine, Calif.
	Meets RoHS

EX EXTREME SPORT BRUSHLESS MOTOR SPECIFICATIONS
	Turns: 8.5 (#3430), 10.5 (#3431), 13.5 (#3432)
	Design: Sensor-based
	Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
	Input Voltage: 4-7 cells (1.2V/cell or 4.8-8.4 total volts) or 2 Li-Poly cells
	Magnet: One-piece, bonded Neodymium
	Watts: 225 (#3430), 195 (#3431), 165 (#3432)
	KV (unloaded): 5,000 (#3430), 4,200 (#3431), 3,300 (#3432) RPM/Volt
	Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
	Motor Weight: 6.73 oz. (190.8 grams)
	Shaft Diameter: 0.125” (3.2 mm) [accepts all existing pinion gears]
	Front Bearing Size: 3/8” x 1/8” (9.5 x 3.2 mm)
	Timing Ring: Black
	Motor Sleeve Color: Gold
	Protection: Thermal

For information about Novak's brushless motors click on the following links: